The Need for Speed (Wheel Speed Sensor Maintenance)

Today's vehicles have some pretty amazing technology in them, including a computerized braking system we all pretty much take for granted these days.  Antilock brake systems (ABS) have been around for years but they help drivers stop in much shorter distances reliably than ever before.  When you see your ABS warning light come on, it's important to find out what's causing the problem. It's a safety issue.

Often the problem when the ABS light comes on is a faulty wheel speed sensor.  (In some cases the traction control light will also come on, perhaps because of a non-working wheel speed sensor.) Your vehicle uses the speed sensors to measure the rotational speed at each wheel. That sensor sends the speed data to a computer that can then adjust braking power and prevent your wheels from locking up. 

If any of the wheel speed sensors isn't working right, the ABS warning light will go on and the vehicle's computer will turn off the antilock brake system.  You'll still have working brakes, but you will lose the functionality of that computerized system.

When your vehicle warns you the ABS has a non-working sensor, you can have a technician check to see what's going on. It could be one of the sensors is dirty and a cleaning will solve the problem.  But it also could be that one or more sensors needs to be replaced. 

A technician will use computerized diagnostic equipment to determine what and where the problem is, replace any bad parts and then check to make sure the system is fully operational. 

Antilock brakes and traction control are significant technologies that help prevent your vehicle from slipping on less-than-perfect road surfaces, especially useful during wintery weather.  Make sure they're helping you drive the way they designed to.

Spring Street Automotive Inc
1701 Spring Street
Quincy, IL 62301
217-228-9141
http://www.springstreetauto.com

Straight Ahead (Wheel Alignment)

If every road was straight and smooth, we wouldn't have to worry much about wheel alignment. But they're not, so we do.  Hitting potholes or driving on rough pavement can knock your vehicle out of alignment and you'll notice it in one of several ways.

Your steering wheel may not be centered when you're driving straight ahead, or your vehicle may pull to one side.  You may find your tires wearing on one side or they may squeal.  All are signs that could point to you needing an alignment.

Your wheels should be perpendicular to the road and parallel with each other.  If not, your tires will wear out faster and your vehicle won't go straight on a level straightaway.

In alignment, there are several factors that must be checked.  One is camber.  Your wheels should be straight up and down if you look at them from the front. If not, you'll wear your tires unevenly on one side.

Another factor is caster, the angle of the steering pivot.  Most vehicles have what's called positive caster, when the top of the steering pivot leans toward the rear.  Proper caster balances steering effort, stability on the highway and cornering.

You may have heard the term "toe" in reference to your wheels.  If you looked at your front wheels from straight above, for example, imagine your wheels were your feet.  If you were to turn your toes in toward each other, that would be toeing in.  The toe of your vehicle should be set to manufacturer's specifications so your vehicle handles well and doesn't prematurely wear out tires.

It's a good idea to have your alignment checked periodically since it can get knocked out by one hard knock or a lot of little knocks.  It's not just about tire wear, it's about ride comfort and safe handling. You may say a vehicle aligned just feels divine.

Spring Street Automotive Inc
1701 Spring Street
Quincy, IL 62301
217-228-9141
http://www.springstreetauto.com

Giving CV Joints the Boot! (CV Joint and Boot Replacement)

Ever wonder how your vehicle’s transmission is connected to your wheels? After all, when you hit a pothole or some other uneven part of a road’s surface, there has to be something that can maintain the connection between the transmission and the wheel yet keep everything moving at the same speed. 

That very cool device is called a CV joint, a kind of driveshaft running to each wheel.  The CV stands for constant velocity because it keeps the drive wheels moving at a constant speed (velocity).  They’re used mostly on front-wheel drive vehicles but also in rear-wheel and all-wheel drive vehicles.

The joints move up and down and adjust to bumpy surfaces.  Plus, they are covered in a rubber boot which protects them from road debris and also holds lubrication in.  There’s a CV joint and boot on the transmission side and one on the wheel side.  Unfortunately, the spot that usually fails first is that rubber protective cover (the boot).  After a lot of wear, tear, bumps, road hazards, heat, and you name it, the rubber rips and the lubrication leaks out.  At that point, it must be replaced. 

Here are signs to tell if your CV joint is bad.

• Your vehicle is pulling to one side as a wheel loses power or you feel a vibration while driving.
• You see grease on the inside or edge of your tires.  
• Your front tires won’t point in the same direction.
• You hear grinding or clicking when you turn.

Sometimes if a broken boot early is caught early, a technician can pack in new grease and replace just the boot.  But if the lubrication has leaked out and the joint is already wearing badly, the CV and boot both have to be replaced.  Give your vehicle the boot (as in a new boot) and CV joint, and you’ll be back on the road to your next destination.

Spring Street Automotive Inc
1701 Spring Street
Quincy, IL 62301
217-228-9141
http://www.springstreetauto.com

Clean Slate (Protecting Vehicle's Finish)

Winter is one of the hardest times to keep your vehicle clean. But did you know neglecting to wash your vehicle in winter could cost you a significant amount of money in the long run? Here's why.

Many areas deal with snow and ice in the winter, and the salt and sand that are used to keep the road surfaces from being slick are also super corrosive to a vehicle's metal body and undercarriage.  That includes all the parts underneath that can be splashed with brine, saltwater and other road debris.  Winter is also tough on vehicles where there isn’t snow, sometimes from ocean salt or winter's extra humidity and rain. 

If you have any breaks in your vehicle's paint, whether it be from a little fender bender or a stone chip, that corrosive winter moisture can get through those cracks and start eating away at the metal underneath. 

If you can, you should get any dents or damage fixed as soon as possible so your vehicle has a protective layer of paint between road chemicals and the metal.  You may want to wait until the warmer weather, but while you're waiting, the damage is getting worse.  If you're not sure of a reputable body repair shop, check with the service advisor where you have mechanical work done.  They're usually knowledgeable about who is good and not so good. 

You also may be tempted to skip the car wash during the winter since your vehicle is just going to get dirty fast anyway.  You may want to reconsider.  Many winter road treatments now use brine that gets in every nook and cranny of your vehicle.  It's wise to clean that off regularly during the winter, and many washing facilities include a spray underneath that gets rid of that salt.  Your vehicle repair facility may even have its own car wash, a nice bonus when you take your vehicle in for repair or regular maintenance. 

Spring Street Automotive Inc
1701 Spring Street
Quincy, IL 62301
217-228-9141
http://www.springstreetauto.com