Slippery When Wet (Driving on Wet Leaves)

When the leaves fall, you might take a sightseeing trip to see them at peak color.  Or you may simply live in a spot where there are a lot of trees.  When those leaves get wet, you'd be surprised to learn just how slippery they can be. 

We all know ice is slippery to drive on.  What causes tires to slip on ice is a thin layer of water that comes between the road and your tires.  Wet leaves can have the same effect.  The surfaces of leaves are super slick when they're dry, even worse when you add a little moisture.  There's one other thing about leaves.  They are smaller than each tire's footprint, so your tread grips the pavement with uneven traction.

One study showed that your stopping distance can more than double on a surface covered with wet leaves when compared to that same road when it's dry.  Double! That can spell trouble.  So if you find yourself heading into an area with wet leaves on the road, slow down before you get into a jam.  If you do start skidding, use the same driving techniques as you would on ice.  Let off the accelerator, resist jamming on the brakes and steer into the skid.  Again, speed can get you into trouble fast on a slippery surface.

One thing that can help is having tires that are appropriate for the way you drive and the places you travel.  Your service advisor can offer suggestions for tires that are right for you.  Have a technician examine your tread depth and the condition of your tires' rubber.  Sun can break down rubber over time, and age can cause tires to fail, even if their tread seems to be deep enough. 

Your tire is the point of traction between your vehicle and the road.  Uncontrolled skids spell trouble and danger.  Slow down when you see wet leaves on the road.  They can make traction disappear before you know it.

Spring Street Automotive Inc
1701 Spring Street
Quincy, IL 62301
217-228-9141
http://www.springstreetauto.com

Why You Have an O2 Sensor (Oxygen Sensor)

If someone asked you what gas made up the largest portion of the atmosphere, what would you guess? Well, it's not oxygen; it only makes up 20.9 percent.  But since we're talking about oxygen, you should know that your vehicle uses oxygen sensors to make sure your engine is running the way it should.

The oxygen sensors measure how much oxygen is in your exhaust.  If there's too much, it means there's a problem with the mixture of fuel and air.  The sensor sends signals to computers in your engine and adjusts the mixture so it maximizes performance and efficiency.  It does this constantly. 

Many vehicles have multiple oxygen sensors.  Some have one close to the engine, another close to the muffler.  Two measurements are better than one since they allow readings to be more accurate.  You may have a vehicle with a dual exhaust, so you'd have twice as many oxygen sensors.

Your oxygen sensors can fail.  One thing that can damage them is contamination from bad fuel.  The sensors can simply wear out, though they usually last a long time.  It's not unusual for an oxygen sensor to last 100,000 miles/160,000 km. One more thing that can cause an oxygen sensor to fail is residue from an engine that's burning oil.  Plus contaminants from the road like salt can also cause problems. 

Here are some signs that your oxygen sensors might be failing.

• The Check Engine light goes on.  In this case, your service facility can plug in a device that will read the code in your engine's computer to see if that's the problem.
• The engine is running roughly.
• Black, sooty smoke is coming out of your tailpipe.
• Your fuel economy is noticeably lower than it used to be.

Head to your service facility and tell your advisor what symptoms your vehicle is experiencing.  They have the equipment and training to track down the issue.  Note that simply replacing the oxygen sensor is often not enough since it doesn't get to the root of the problem; other repairs may be needed. 

So make sure your oxygen sensors are working the way they should be.  Oh, and back to the question of what gas makes up most of the Earth's air?  It's nitrogen, which comprises 78 percent of the air we—and our engines—breathe.

Spring Street Automotive Inc
1701 Spring Street
Quincy, IL 62301
217-228-9141
http://www.springstreetauto.com

Follow the Bouncing Vehicle (Bad Struts and Shocks)

If you hit a bump in the road and your vehicle just keeps bouncing up and down for a lot longer time than it used to, you may have bad struts and shocks.  They're the things that help to keep your vehicle's wheels and tires planted to the road surface.

But they don't last forever.  With care and depending on where and how you drive, shocks and struts should be replaced at intervals ranging from 50,000 miles/80,000 km to 100,000 miles/160,000 km.  If you drive on bumpy roads with a lot of potholes, that interval will likely be shorter. Rough surfaces can take their toll.

But how do you know if your shocks and struts are doing their job properly? The best way is to have your vehicle checked by a technician.  He or she can inspect the shock absorbers and struts for leaks, corrosion and damage.  Mounts and bushings can also go bad and they should be evaluated as well.  A thorough examination by a technician will also include looking at other suspension parts. Some may contribute to making your vehicle behave the same way if they're broken, corroded, worn or bent.     

If you need new shocks and struts, your service advisor will make sure that you get those that meet manufacturer's specifications.  That's important because they want to make sure you're getting the handling and performance engineers designed your vehicle to have.

Spring Street Automotive Inc
1701 Spring Street
Quincy, IL 62301
217-228-9141
http://www.springstreetauto.com

The Right Oil for the Season (Engine Oil Viscosity)

As the temperatures plunge, certain types of engine oil may not flow as easily as they did when it was warmer.  Makes sense, doesn't it? Just like molasses gets thicker as the temperature goes down, engine oil does the same thing. So, maybe you're wondering if you have to change your oil as the seasons change so it's just the right thickness to lubricate your engine parts. 

How well engine oil flows is called its viscosity. There are different types of oil—some that have just one viscosity and others called "multigrade" oils.  Here's the difference.

A single viscosity oil will flow better when it's hot but not as well when it's cold.  A multigrade oil is engineered so that its flow properties at cold temperatures are different than they are at warm temperatures.  In other words, a multigrade oil can start out in colder temperatures acting like a thinner oil and then behave like a thicker oil when it's warm.  That's a pretty cool trick and it's why multigrade engine oil is used in nearly all vehicles.  Your vehicle's manufacturer has the correct viscosity of oil for your particular model included in the owner's manual.

Another choice you have to make when it comes to engine oil is whether you use conventional oil, synthetic oil or a blend of the two.  Synthetic oils have some advantages over conventional, such as resisting breakdown better and withstanding higher temperatures.

Check with your service advisor to see which viscosity and type of oil is recommended for your vehicle.  It's important that in cold weather, the oil flows through your engine at the right thickness so that parts are being properly lubricated.  That will make sure you'll get good fuel economy and performance, no matter what the temperature is.

Spring Street Automotive Inc
1701 Spring Street
Quincy, IL 62301
217-228-9141
http://www.springstreetauto.com