The Edible Engine

You may have had a friend whose vehicle was the victim of hungry rodents.  After all, mice, rats and squirrels—even rabbits—have been known to gnaw on wires in engine compartments, causing vehicle electrical systems to go haywire.  They can disable a vehicle completely and be very expensive to fix.

In 2017, some drivers noticed their vehicle's wiring was being chewed and found out the automaker was using a relatively new material for covering their wires: soy.  Many of the repairs to their new vehicles weren't covered under warranty by the manufacturer when it was discovered rodents were eating the wiring.  So the owners filed a class action suit, saying the soy covering was essentially baiting the critters. 

The automakers tell a different story, saying mice, rats and squirrels have been chewing through wire insulation long before it was made out of soy. 

Regardless of what the insulation is made of, vehicle owners should make sure rodents aren't chowing down and creating a problem in the engine compartment.  They can have their repair facility check for these signs:  Little bits of acorns, leaves, chewed up plastic and animal droppings in the engine's nooks and crannies.  Using a black light, your technician can detect animal urine, a sure sign that they've been using your engine compartment as a warm apartment, a nest and a dining room. 

You can take steps to prevent rodents from chomping your vehicle's parts.  Honda—one of the vehicle manufacturers that uses soy-based wiring covering—makes a rodent tape.  It contains a spice called capsaicin that rodents find too hot to handle.  Other preventative measures include installing metal mesh around wiring harnesses or spraying the engine compartment with special rodent-repellants. 

Rodent damage can cost one vehicle owner thousands of dollars to fix, not the kind of bite anyone wants taken out of their bank account. 

Always on Guard (TMPS)

One of the most important things you can do to keep your vehicle running safely is to make sure your tires are properly inflated.  If one or more is vastly over- or underinflated, that has the potential to cause major handling problems and may result in a dangerous accident.

All vehicles in recent years are equipped with Tire Pressure Monitoring Systems, or TPMS.  One system uses small sensors in the tires that continually check the pressure in each tire.  That sensor sends a signal to computers in your vehicle which turns on an instrument panel light warning of low pressure when at least one is very low. Or it may update a numeric reading on your instrument panel which gives you an approximation of how many PSI (pounds per square inch) of air is in each tire. 

Another system works with your antilock brake system to measure the size of your vehicle’s tires.  When one wheel is going faster than another, it will spin faster. A computer sees that and alerts you that tire’s diameter is smaller than the others and therefore must be underinflated.

No matter what system you have, it’s also helpful for you to know how much pressure each tire is supposed to be inflated to.  You can find that on a label on the driver’s side door sill. In addition, the TPMS system should not be used as a substitute for checking your tires with a tire gauge since the TPMS accuracy usually isn’t quite as precise.  Keep in mind that tire sensors can fail, so each system acts as a backup for the other. 

Since many vehicles these days don’t have spare tires, it’s good to know that your TPMS can warn you if you have a leak in one of your tires.  If you get a low-pressure warning, many systems will tell you which tire is low, so you can do your own visual check.  Often you can see if you’ve picked up a nail or a screw if it’s sticking out of the tread or near the sidewall.

Being able to receive an early warning from your vehicle of abnormal tire pressure may give you a chance to safely drive to a service center before your tire slowly goes completely flat (which can ruin the tire and badly damage the rim). It also may ultimately prevent you from being stranded somewhere with a flat tire or, most importantly, having a sudden blowout on the road. 

Spring Street Automotive Inc
1701 Spring Street
Quincy, IL 62301
217-228-9141
http://www.springstreetauto.com

Steering You Right (Tie Rod End Replacement)

For drivers, S stands for safety.  And there are three other words that start with S that are all equally important: starting, stopping and steering. For your vehicle to be at its safest, all three functions must be in top shape. 

Steering is one of those things we take for granted.  After all, you turn the wheel and your vehicle changes direction. But sometimes you might notice your steering is a little off.  Maybe you've noticed you turn your wheel slightly and your vehicle doesn't turn. You may feel a little vibration in the wheel that increases when you go faster.  You may hear a little squeak from the wheels when you steer and you may notice your tires aren't wearing evenly.

These are signs that your tie rod ends may be failing. Tie rod ends help connect your vehicle's steering mechanism to the wheels.  They can wear out after you've hit one too many potholes or just from constant use.  They can cause sloppy steering and loose handling, and they should be replaced when they've reached the end of their life span.

If you notice any of these things happening on your vehicle, bring it in to us so a technician can check it out.  There are a couple of different types of steering, recirculating ball steering and the one most of the latest vehicles have, rack and pinion. When we replace your tie rod ends, we will remove and replace the old ones and adjust them to meet your vehicle manufacturer's specifications.

Tie rod ends should often be replaced in pairs, and your vehicle should be aligned afterwards.  Keep your steering working the way it's supposed to, and your vehicle will be sure to steer you right.

Spring Street Automotive Inc
1701 Spring Street
Quincy, IL 62301
217-228-9141
http://www.springstreetauto.com

Let?s Shift Gears (Transmission Fluid Replacement)

If you have a vehicle with an automatic transmission, you probably never think about gear shifting.  When motor vehicles were invented, all of them had to be shifted manually.  But that wonderful self-shifting transmission, referred to these days as simply an “automatic,” changed everything.

Automatic transmissions have a lot of moving parts, and they are bathed in a fluid that keeps them lubricated and cool. That fluid also is vital to the whole gear shifting process. 

As you might imagine, the longer that fluid does its job, the more chance it has to pick up some contaminants.  Sometimes a leak will spring up in an automatic transmission.  Dirty transmission fluid or not enough of it will both create problems. It may cause your Check Engine light to come on, or your transmission may run rough and make strange noises.

The best strategy is not to let it get to this point.  That means you should have your transmission fluid replaced at regular intervals. Your vehicle’s manufacturer recommends how often you should have your transmission fluid changed. You should also have the fluid checked at regular intervals to detect if any problems crop up before that recommended interval. They’ll check not only the level but also inspect its condition.

Keep in mind that most automatic transmission problems are caused by overheating. You can reduce your chances of transmission failure by making sure your transmission—and its fluid—is regularly inspected and the fluid is replaced when it needs to be.

Spring Street Automotive Inc
1701 Spring Street
Quincy, IL 62301
217-228-9141
http://www.springstreetauto.com