3 Winter Windshield Tips (Care of Windshield)

Cold weather can present some real challenges when it comes to your vehicle's windshield.  Think of it.  Your windshield is your window to the world when you're driving, and clear visibility is extraordinarily important for safe travels. So here are 3 tips to ensure that your windshield can do its job during the cold weather.

1. Don't ever pour hot water on a frozen windshield.  Let's say you head outside and see your vehicle covered with ice. You think, hey, maybe I can heat up a pot of water on the stove and melt that off fast.  Don't do it!  You run the risk of shattering the glass the second that hot water hits the frigid glass.  Ditto for using a propane torch.  Glass does not do well with sudden temperature changes.  Instead, turn on your engine and start the defroster, which heats the windshield up gradually.  Use a plastic scraper designed for windshields (don't EVER use metal to scrape) and be patient.  Don't hammer on the ice to break it into pieces.  Sudden pressure and glass don't mix.
2. Keep your wiper blades up off the glass.  If you park your vehicle outside and you think there's a chance of frozen precipitation falling, do what smart winter drivers do.  Lift the wiper arms off the glass and leave them extended with the blades not touching the glass at all.  That way when you go back to your vehicle, you won't have to try to pull the wipers off the icy glass (which can damage the rubber blades) or start the wipers with them frozen solid to the windshield.  Many drivers have burned out their wiper motor that way, and that can be a pricey repair.
3. Keep your windshield washer fluid topped off and use it often.  So you've followed the steps above and you're on the road. Salt, brine and sand can muck up the windshield fast, causing your wiper blades to smear the glass, re-freeze the icy snow and blind you.  It's important to use wiper fluid made for low temperatures so it doesn't freeze on your glass.  Use it often so any road debris won't scratch the glass like sandpaper.  And make sure your defroster is working properly, keeping your windshield warm enough to prevent ice from forming.  

Spring Street Automotive Inc
1701 Spring Street
Quincy, IL 62301
217-228-9141
http://www.springstreetauto.com

Visibility Disaster! (Windshield Washer Pump Replacement)

Let's say you live in a cold climate where the snowy, icy weather challenges you to clear the salt and debris tossed up on your windshield.  You push your windshield washer switch expecting a good stream of fluid so the blades can wipe the glass clean. Yet nothing comes out.  Nada, zip.  What's going on? You know you filled up the windshield washer reservoir within the last week or so. 

Well, there could be a few things causing your windshield washing system to fail.  One culprit? The hoses that are supposed to carry that fluid from the washer pump to the spray nozzles may be frozen, or maybe they're cracked and leaking. It could be the nozzles themselves are stopped up, either iced up or jammed full of debris.  Your windshield wiper/washer switch could be worn out or the electrical system may not be conducting power to the washer pump. 

It's important that this system work properly, especially on days when the sun may be in front of you and your windshield is covered with a cloudy, icy mess.  Seeing what's going on in front of you may be like trying to peer through frosted glass, and that's not a safe situation for you or the drivers around you. You need to have this checked out by a technician as soon as you can.

Let's say the technician discovers it's not any of those components.  Turns out it's the electric windshield washer pump itself that's failed. After replacing it, everything is working fine, and you can see again.  As so often is the case with today's complex vehicles, figuring out the root cause of a problem can be tricky.  Rely on your vehicle service facility since they have the know how and diagnostic equipment to make sure your view of the road will always be crystal clear.

Spring Street Automotive Inc
1701 Spring Street
Quincy, IL 62301
217-228-9141
http://www.springstreetauto.com

Let's Clear Some Things Up (Headlight Restoration)

You know how exposing your skin to sunlight can cause sunburn and other unhealthy things.  Sunlight can also create major problems for your headlights.  After they've been exposed to ultraviolet light, acrylic headlights can yellow and fog due to oxidation.  And when that happens, less light can pass through the plastic, reducing the effectiveness—and safety—of your headlights. 

It's not just the UV light that causes headlights to turn cloudy.  Road grime and debris gets kicked up and can scratch the plastic, diffusing the light that should pass through them when they're clear.  Plus, when your vehicle was new from the factory, the headlights had watertight seals all around to prevent moisture from getting into them and fogging them up with water vapor.  Just like clouds can hide the sun, tiny water molecules can diffuse the light from your headlight bulbs. 

Sure, you could buy replacement parts and start fresh.  But the good news is many vehicle repair facilities can restore your original headlights to perform like they did when you first bought your vehicle.  Here's how it works:

• A technician will protect your vehicle's paint by either taking the headlights out or by taping off the paint near the headlights and leaving them in place.
• Residue is removed from the headlight surfaces by wet sanding to remove the oxidized plastic.
• Using special compounds, the technician will buff and polish the surface of the lens so it looks as smooth as glass. 
• The newly-polished plastic is then sealed with wax or a special sealant designed to keep them operating like new. 
• If the seals that keep the moisture out of the inside of your headlights have dried out or cracked, they will be restored or replaced to keep condensation from forming again.

Visibility at night is vital for safe driving, and if your headlights aren't performing up to their potential, the less you'll be able to see ahead of you.

There are many advantages of having your headlights restored rather than buying new or aftermarket replacements.  It's friendlier to the planet since plastics are made of oil, so it's reducing the amount of plastic that is manufactured.  And it's usually cheaper to have your headlights restored rather than replaced.

Consider headlight restoration a way to literally recycle those parts of your vehicle.  That seems to be perfectly clear!

Spring Street Automotive Inc
1701 Spring Street
Quincy, IL 62301
217-228-9141
http://www.springstreetauto.com

A Hot Mess (AC System-Compresser)

Air conditioning used to be a real luxury in a vehicle, but now it's standard in most.  Your vehicle's air conditioning system is built to last a pretty long time, but like anything mechanical, sometimes it fails. 

It helps to know a little about how the A/C works. There's a compressor that pressurizes the refrigerant (you probably recognize the term Freon).  That makes it hotter, so it then goes through a condenser that cools it off.  Then another component takes out impurities and humidity before the Freon goes to a device that makes it lose pressure before it goes to the evaporator.  That's where it gets colder and takes the humidity out of the air. Then your vehicle's ventilation system blows air over the evaporator, cooling the cabin air that gives you such relief on a hot day.

Of all these parts, one that does a lot of work is the compressor.  It has to compress that refrigerant and circulate it through the system.  It turns on and off several times when it's working. The good news is that if it's going to fail, it sometimes lets you know. 

One of the signs that your air conditioning compressor is going bad is a noise under the hood when the engine is on, sometimes a squealing or grinding sound. It usually is pretty noticeable. Compressors have a bearing that can seize up after time, causing the belt that drives it to squeal when it's trying to turn something that won't turn.  It will sometimes cause that belt to break. 

Your service advisor can tell you if your compressor is repairable or must be replaced.  In the case of a broken belt (often a serpentine belt that drives several components) the belt will have to be replaced as well.

The compressor also has a clutch that turns the compressor on and off so it doesn't have to run all the time. Sometimes that clutch can fail, too, and your service advisor will often recommend you replace the compressor and the clutch at the same time. Our technicians can help make sure your air conditioning system keeps its cool, and you along with it. 

Spring Street Automotive Inc
1701 Spring Street
Quincy, IL 62301
217-228-9141
http://www.springstreetauto.com

Read a Good Tire Lately? (Tire Wear)

There's lots of good information to read in books and online.  You might not know that you can also "read" your tires and learn a lot about what shape they're in and if they are in need of attention. It's important to know how your tires are doing because a tire failure can be very dangerous to you, your passengers and others on the road near you.

You read your tire by looking at the surface that rides on the road, where the tread is.  Check out the outer and inner edges.  If you notice there's more wear on the inner or outer edge than on the rest of the tread, your vehicle could be out of alignment.  Wear on an inner or outer edge could mean your wheels are leaning too much to one side.  When you see this, visit our service center soon to have the alignment checked.

What about if both edges are worn? That could be a sign that you don't have enough air in that tire.  In an underinflated tire, the middle is not contacting the road surface as much as the edges, so the edges wear down first.  It could also mean that you're taking corners too aggressively or your tires haven't been rotated on a regular schedule.

Another thing you might see on your tires' tread area is wear in the center of the tire.  That means you likely have too much air in that tire.  Too much air makes your tire contact the road in the middle more than on the edges so the middle wears down prematurely. 

You might also see some smooth spots on the tread in irregular spots. This is called cupping. This is sometimes caused by suspension problems. A technician can examine your suspension to see if it is up to the manufacturer's specifications.

Finally, you may spot tires that are worn unevenly in a pattern that goes diagonal to the tread pattern.  This could mean your tires are out of balance, something our service center can check. They might also check alignment at the same time.

Your tires are the only part of your vehicle that contacts the road surface.  That means your acceleration, traction, steering and braking are all dependent on your tires being healthy. Maintain your tires by having one of our trained technicians read the clues and making sure they're always in roadworthy shape. 

Spring Street Automotive Inc
1701 Spring Street
Quincy, IL 62301
217-228-9141
http://www.springstreetauto.com