A Sticky Brake Situation (Parking Brake Service and Maintenance)

We've all been there.  You park your vehicle on a steeper than usual hill and worry about it rolling down while you're running your errands.  So you decide you'll use the parking brake.  When you get back, you release the parking brake, hit the ignition, put it in gear and—uh, oh—you can feel the parking brake is still on.  It's stuck.  What do you do now?

Welcome to the world of infrequently-used parking brakes.  Yes, they do stick for several reasons. It's common for components to corrode and get locked up.  Sometimes if you have applied it extra hard, it can jam.  Could be a rusty cable, could be a spring that doesn't return the brake to its disengaged position.  Some pieces just break when they're stressed for the first time in a while. A caliper or the pivot arm it's on can also stick.

There are a few things you can try to unstick it.  Carefully rock your vehicle by putting it first in drive and then reverse.  You have to be careful doing that, though, because sometimes you can damage the transmission.  You can try working the parking brake control a few times to see if that will loosen the corrosion.  If you can't unstick it, you can try driving slowly a short distance to a repair facility near you.  Sometimes it won't cause damage to the brakes but it depends on how tightly the parking brake was applied and what was stuck.  You may also have to have your vehicle towed to a repair facility.

In any case, once you've seen these symptoms, have your vehicle brakes looked at by a professional who can fix the root of the problem.  Better yet, don't let your vehicle get in this condition; regular maintenance and inspections by a trained technician should prevent you from getting in a jam somewhere thanks to a stuck parking brake.  You could use a "brake" like that.

Spring Street Automotive Inc
1701 Spring Street
Quincy, IL 62301
217-228-9141
http://www.springstreetauto.com

Make your Service Visit at Spring Street Automotive Inc a Good One

Most people don't love going to get their vehicle serviced, but it's one of those things you just have to do. So you might as well get the most of out of it. There are some steps you can take that will likely help you get the best results possible.

For one thing, it's important to describe your problem (or problems) to the service advisor accurately and clearly. If your vehicle is making a noise, for example, take time to really listen to it and think of the best way to describe it. Does it increase in speed when you go faster? If you feel a vibration somewhere, where in the vehicle does it seem to originate? Some service advisors recommend writing things down. That way the driver won't forget any important clues that could lead to a successful resolution of the problem.

Another thing is to make sure your vehicle is cleaned out and free of junk. That way the technician can access those nooks and crannies where some vital components may be. If your vehicle is full of strollers, boxes or your collection of fast food containers, it won't be easy for the technician to reach some of those parts. Oh, and if your vehicle is neat, it does send a signal that you really care about it.

Finally, stay out of the way of the technician. A recent survey of technicians reveals they work more efficiently and do a better job when they don't have someone hanging on their every move. Can you imagine how you'd feel if someone hovered over you all day while you were trying to get your work done?

Spring Street Automotive Inc
1701 Spring Street
Quincy, IL 62301
217-228-9141
http://www.springstreetauto.com

Keeping Your Cool (Coolant leak repair)

If there’s one thing you should pay attention to with your vehicle, it’s the temperature gauge. It’s the one that may say C---H (that means “cold---hot”).  Or maybe yours has a picture of a thermometer on it and a blue and red zone.  If you see the needle heading farther to the “H” or red area, that means your vehicle’s engine is running hotter than it normally does.

One of the most common causes of an engine running hot is a leak in your cooling system.  Maybe you’ve seen puddles of coolant under your vehicle, or you’ve smelled the coolant, either inside or outside your vehicle (it has a sort of “sweet” or fruity smell). That’s your engine giving you a warning signal that it’s time to head over to your repair facility to find out what’s going on.

Your vehicle’s coolant can leak for several reasons.  You may have hoses that are deteriorating (heat and age take their toll). It’s possible the pump that circulates coolant has developed a problem (seals and bearings can fail from heat and wear).  You may have something as simple as a bad radiator cap.  Or your radiator or heater core may have holes in it. 

If your coolant is leaking out, this can cause serious damage to your engine if you just let it go.  Your engine could get so hot that some of the metal parts start to warp.  Sometimes, your coolant can start mixing in with your engine oil.  That can result in a very expensive repair if it gets to that stage, so have it checked out before that happens.

A technician will visually inspect your coolant system, including the reservoir tank, check hoses and fittings, test the water pump, and also may pressure test the radiator.  When the problem or problems are found, they will replace the necessary parts and get you back on the road. 

When it comes to a coolant leak, finding the cause can be tricky.  But it’s important to catch a cooling system issue in time—before your engine sustains more serious damage.  Now, that’s pretty cool.

Spring Street Automotive Inc
1701 Spring Street
Quincy, IL 62301
217-228-9141
http://www.springstreetauto.com